Desal AG4040TF Indonesia

Selamat Datang di

PT. Watermart Perkasa

Prioritas Indonetwork
Tahun ke-3

PT. Watermart Perkasa
Indonesia

Katalog Produk

(Gambar)

contact@watermart.co.id

Cara Pembayaran:	Transfer Bank (T/T), Tunai
Keterangan:	The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig ( 1, 379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with male end connections. * GE Desal AG4040TF RO Element TFC: * The GE Desal AG4040TF Dry - Filmtec Style reverse osmosis elements are used for brackish water desalination. * The Desal AG4040TF RO element is tape wrapped. * The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. * GE Osmonics Desal AG4040TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections. * GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired. * These elements allow moderate energy savings, and are considered a standard in the industry. Element Specifications Model : AG4040TF Flow : 2200 GPD ( 8.3 m3/ d) Active Area : 85 ft2 ( 7.9 m3) Avg. Rejection : 99.5% Min. Rejection : 99% Part Number : 1206774 Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH7.5 after 24 hours. Individual flux may vary + 25% / -15% . Operating and Design Parameters Membrane: Thin Film Membrane ( TFM® ) Typical Operating 200 psig ( 1, 379 kPa) Pressure: Maximum Pressure: 450 psig ( 3, 103 kPa) Maximum Temperature: 122° F ( 50° C) Chlorine Tolerance: 1, 000 ppm-hrs, dechlorination recommended Optimum Rejection pH: 7.0 -7.5 Operating pH Range: 4.0 - 11.0 Cleaning pH Range: 2.0 - 11.5 Feed NTU:

Cara Pembayaran:

Transfer Bank (T/T), Tunai

Keterangan:

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig ( 1, 379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with male end connections.

* GE Desal AG4040TF RO Element TFC:
* The GE Desal AG4040TF Dry - Filmtec Style reverse osmosis elements are used for brackish water desalination.
* The Desal AG4040TF RO element is tape wrapped.
* The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
* GE Osmonics Desal AG4040TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.
* GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired.
* These elements allow moderate energy savings, and are considered a standard in the industry.

Element Specifications

Model : AG4040TF

Flow : 2200 GPD ( 8.3 m3/ d)

Active Area : 85 ft2 ( 7.9 m3)

Avg. Rejection : 99.5%

Min. Rejection : 99%

Part Number : 1206774

Specifications are based on a 2000 mg/ L NaCl solution at 225 psig operating pressure ( 1551 kPa) , 77° F ( 25° C) , 15% recovery, pH7.5 after 24 hours. Individual flux may vary + 25% / -15% .

Operating and Design Parameters

Membrane: Thin Film Membrane ( TFM® )

Typical Operating 200 psig ( 1, 379 kPa)

Pressure:

Maximum Pressure: 450 psig ( 3, 103 kPa)

Maximum Temperature: 122° F ( 50° C)

Chlorine Tolerance: 1, 000 ppm-hrs, dechlorination recommended

Optimum Rejection pH: 7.0 -7.5

Operating pH Range: 4.0 - 11.0

Cleaning pH Range: 2.0 - 11.5

Feed NTU:

Kenalkan ke teman Anda

Korespondensi Perusahaan
Nama:	Nn. Reny Ardiansyah [Penjualan]
E-mail:	contact@watermart.co.id
Situs Web:	http://www.watermart.co.id
Nomer HP:	08121012569
Nomer Telpon:	+62-21-42885478
Nomer Faks:	+62-21-42888376
Alamat:	Jalan Letjen Suprapto Komplek Ruko Mega Grosir Cempaka Mas Blok N No. 30 Jakarta Pusat, Jakarta Indonesia

Membuat situs langsung jadi?
Silahkan Klik disini!