Hach CL17 Chlorine Analyzer Indonesia

Selamat Datang di

PT. Watermart Perkasa

Prioritas Indonetwork
Tahun ke-3

PT. Watermart Perkasa
Indonesia

Katalog Produk

(Gambar)

contact@watermart.co.id

Cara Pembayaran:	Transfer Bank (T/T), Tunai
Keterangan:	Features and Benefits Reliable and Economical Chlorine Analysis The Hach CL17 Chlorine Analyzer uses colorimetric DPD chemistry to continuously monitor water for free or total residual chlorine. This CL17 is a dependable and economical alternative to instruments that rely on costly electrodes or complex procedures. The analysis method is unaffected by even large swings of pH and measurements are more accurate and precise than those of other systems. Manual or Automatic Feed Pump Control Both an alarm for manual chlorine feed control and a 4-20 mA output for automatic control of chlorine feed pumps is available in the CL17 Analyzer. When set for manual control, the instrument notifies the operator of out-of-limit chlorine levels for manual intervention in the disinfection process as needed. For automatic control of chlorine feed pumps, the CL17 can use one of two methods: 1. On-Off Control turns the feed pumps on when chlorine levels fall too low for disinfection and off when levels rise above a pre-set limit. 2. Proportional Control adjusts the amount of chlorine in proportion to the strength of the CL17’ s output signal Simple Maintenance Routine maintenance can typically be performed in 15 minutes per month because the sample cell and reaction chamber are easy to clean and the case provides quick access. ( Difficult samples may require more frequent cleaning.) The CL17 is also equipped with self-testing diagnostics. Applications Drinking Water - The CL17 Chlorine Analyzer can be used in finished water where residual chlorine levels must be maintained during distribution. it can also be used to monitor raw water to facilitate preoxidation, disinfection, and control of taste and odor problems. Wastewater - Large tubing and fittings and a self-cleaning By-Pass Y-Strainer Kit for the CL17 ensures continous operation without clogging. Industrial - The CL17 can be used to monitor disinfection and prevent biological build-up in applications that involve chemical or industrial processes ( feed water) , heating and cooling water, or food and beverage applications. It is also useful in systems that use reverse osmosis, to protect expensive

Cara Pembayaran:

Transfer Bank (T/T), Tunai

Keterangan:

Features and Benefits

Reliable and Economical Chlorine Analysis
The Hach CL17 Chlorine Analyzer uses colorimetric DPD chemistry to continuously monitor water for free or total
residual chlorine. This CL17 is a dependable and economical alternative to instruments that rely on costly
electrodes or complex procedures. The analysis method is unaffected by even large swings of pH and measurements
are more accurate and precise than those of other systems.

Manual or Automatic Feed Pump Control
Both an alarm for manual chlorine feed control and a 4-20 mA output for automatic control of chlorine feed pumps is
available in the CL17 Analyzer. When set for manual control, the instrument notifies the operator of out-of-limit chlorine
levels for manual intervention in the disinfection process as needed. For automatic control of chlorine feed pumps, the
CL17 can use one of two methods:

1. On-Off Control turns the feed pumps on when chlorine levels fall too low for disinfection and off when levels rise above a pre-set limit.
2. Proportional Control adjusts the amount of chlorine in proportion to the strength of the CL17’ s output signal

Simple Maintenance

Routine maintenance can typically be performed in 15 minutes per month because the sample cell and reaction chamber are

easy to clean and the case provides quick access. ( Difficult samples may require more frequent cleaning.) The CL17 is also

equipped with self-testing diagnostics.

Applications

Drinking Water - The CL17 Chlorine Analyzer can be used in finished water where residual chlorine levels must be

maintained during distribution. it can also be used to monitor raw water to facilitate preoxidation, disinfection, and control

of taste and odor problems.

Wastewater - Large tubing and fittings and a self-cleaning By-Pass Y-Strainer Kit for the CL17 ensures continous operation

without clogging.

Industrial - The CL17 can be used to monitor disinfection and prevent biological build-up in applications that involve
chemical or industrial processes ( feed water) , heating and cooling water, or food and beverage applications. It is also
useful in systems that use reverse osmosis, to protect expensive

Kenalkan ke teman Anda

Korespondensi Perusahaan
Nama:	Nn. Reny Ardiansyah [Penjualan]
E-mail:	contact@watermart.co.id
Situs Web:	http://www.watermart.co.id
Nomer HP:	08121012569
Nomer Telpon:	+62-21-42885478
Nomer Faks:	+62-21-42888376
Alamat:	Jalan Letjen Suprapto Komplek Ruko Mega Grosir Cempaka Mas Blok N No. 30 Jakarta Pusat, Jakarta Indonesia

Membuat situs langsung jadi?
Silahkan Klik disini!